Bromic Heater Ceiling Poles
With Bromic’s Gas Heater Ceiling Poles, you have the ability to mount two heater units back-to-back, beneath flat or pitched ceilings, up to 4m/13’ above the floor. Pre-cut kits are available in 200mm/7.9” increments, between 246mm/9.7” and 1046mm/3’5” in length, to optimize heater unit heights where ceilings are between 3.2m/10’6” and 4m/13’ above the floor.
Bromic Heat Deflector
By absorbing heat that would otherwise escape vertically, Bromic’s Gas Heat Deflectors significantly reduce the clearance needed between the top of a heater and the surface above from 1100mm/3’ to 350mm/14”. Our stainless steel deflectors are unique in their dual layer construction, which uses the rigid top layer for reinforcement while reducing radiation of heat absorbed by the bottom layer.
Bromic Heating Wireless Controller
With the ability to switch power supply to two separate circuits, Bromic’s Wireless Controller enables independent ‘On/Off’ control of up to two electric or four gas heaters. Providing control from up to 30m/100’ away, the unit’s included radio transmitter is entirely portable, but can also be easily mounted with double-sided adhesive or the screw provisions within the case.
Bromic Heating Wireless Dimmer Controller
Augmenting the functionality of our base-model Wireless Controller, the Bromic Heating Wireless Dimmer Controller offers the ability to dim electric heating output over a percentage gradient. Allowing quick reductions of heating output to 25%, 50% or 75%, the unit’s radio transmitter also offers the ability to adjust output up or down in 1% increments.
Bromic Heating Wireless Master Remote
For those wishing to implement wireless control solutions on a grand scale, the Bromic Heating Wireless Master Remote delivers consummate comfort control and user-programmable customization. Able to adjust an unlimited number of controllers in 6 groups from a single point within its 30m/100’ range, this is invaluable for larger venues.