Along with designing award winning outdoor heaters that are renowned for their exceptional performance, Bromic Heating has also developed a range of accessories, controls and mounting kits which have been specifically designed to ensure our Smart-Heat™ range makes superior heating simple.
SMART-HEAT™ WIRELESS CONTROLLERS
Bromic Heating Wireless On/Off Controller
With the ability to switch power supply to two separate circuits, Bromic’s Wireless Controller enables independent ‘On/Off’ control of up to two electric or four gas heaters. Providing control from up to 30m/100’ away, the unit’s included radio transmitter is entirely portable, but can also be easily mounted with double-sided adhesive or the screw provisions within the case.
Bromic Heating Wireless Dimmer Controller
Augmenting the functionality of our base-model Wireless Controller, the Bromic Heating Wireless Dimmer Controller offers the ability to dim electric heating output over a percentage gradient. Allowing quick reductions of heating output to 25%, 50% or 75%, the unit’s radio transmitter also offers the ability to adjust output up or down in 1% increments.
Bromic Heating Wireless Master Remote
For those wishing to implement wireless control solutions on a grand scale, the Bromic Heating Wireless Master Remote delivers consummate comfort control and user-programmable customization. Able to adjust an unlimited number of controllers in 6 groups from a single point within its 30m/100’ range, this is invaluable for larger venues.
SMART-HEAT™ GAS HEATER ACCESSORIES
Bromic Heat Deflector
By absorbing heat that would otherwise escape vertically, Bromic’s Gas Heat Deflectors significantly reduce the clearance needed between the top of a heater and the surface above from 1100mm/3’ to 350mm/14”. Our stainless steel deflectors are unique in their dual layer construction, which uses the rigid top layer for reinforcement while reducing radiation of heat absorbed by the bottom layer.
Bromic Heater Ceiling Poles
With Bromic’s Gas Heater Ceiling Poles, you have the ability to mount two heater units back-to-back, beneath flat or pitched ceilings, up to 4m/13’ above the floor. Pre-cut kits are available in 200mm/7.9” increments, between 246mm/9.7” and 1046mm/3’5” in length, to optimize heater unit heights where ceilings are between 3.2m/10’6” and 4m/13’ above the floor.
SMART-HEAT™ ELECTRIC HEATER ACCESSORIES
Bromic Heater Recess Kits
When subtlety and style are paramount, Bromic’s Electric Heater Recess Kits enable seamless integration of heating solutions in any area. Bromic Platinum and Tungsten Smart-Heat™ Electric units both offer unique recess kits which permit flush-mounting in roof cavities as small as 250mm/10”, allowing them to service spaces with ceilings between 2.4m/7’10” and 3.5m/11’6” above floor level.
Bromic Heater Tube Suspension Kits
Suspending heating units at an effective height in higher ceiling applications, if wall-mounting isn’t appropriate, is simple with Bromic’s Electric Heater Tube Suspension Kits. Comprising two 1m/3’3” poles that can be cut to length for even heater suspension, these kits allow directional adjustability while delivering heat directly from above.
SMART-HEAT™ PORTABLE GAS HEATER ACCESSORIES
Heater Head Cover
Protecting components from the elements, the Bromic Heating Heater Head Cover simply and effectively weatherproofs the head of the Tungsten Smart-Heat™ Portable gas heater. This genuine cover is easy to fit and secured with a drawstring, providing an effective storage solution that extends the life of an already exceptionally durable heater when it is not in use.