MSP121T Zanotti SP Split/Remote Refrigerated Chiller System
Bromic carries a line of dependable cold room refrigeration systems from industry-leading European manufacturer Zanotti, including the MSP121T Zanotti SP Split/Remote Refrigerated Chiller System. An easy-to-install, energy-efficient and highly durable unit that’s reliable in Australian conditions. Take a closer look at this featured product!
Get more out of your cold room refrigeration equipment. Learn more about the MSP121T Zanotti SP Split/Remote Refrigerated Chiller System – download the product catalogue or make an inquiry!
Product Request Form Refrigeration
The MSP121T Zanotti SP Split/Remote Refrigerated Chiller System comes with pre-charged refrigerant piping with quick-connect joints for no-fuss installation. Its split-type system allows the condenser to be set up out in fresh air up to 10 metres away from the in-room evaporator. The unit also includes prewired bulkhead lighting as well as prewired connection for door switches and door heaters.
For easy settings customisation and programming, the unit features a touchscreen digital controller that is simple to use. Finally, a hot gas defrost system eliminates the need for drainage, reducing overall energy consumption and maintenance requirements.
The MSP121T is supplied with 15A plug and uses R404a, a safe, non-flammable and non-toxic refrigerant. It runs on 4.6A with a 6.4A full-load capacity. This cold room chiller offers cooling power between -5 to +10°C, with a maximum setting of 45°C.
- Pre-charged piping with quick-connect joints for rapid installation
- Prewired for included bulkhead lighting along with door switches and door heaters
- Hot gas defrost reduces energy consumption and maintenance
- Toughscreen digital controller enables simple programming and customisation
|Gross Weight (kg)||56|
|Motor Type||Split System|
|Temp. Range (°C)||-5 to +10|
|Max. Ambient Temp. (°C / RH)||45|
|Refrigeration Power (W)||1311|
|No Drainage Required||Yes|
|Power Supply (A)||15|
|Type of Control||Electronic|
|Pre Wired For Internal Light||Yes|
|Pre Wired For Heated Door Trim||No|
|Run/Full Load (Amps)||4.6/6.4|