BGM330 Zanotti GM Slide-In Refrigerated Freezer Systems
Product Request Form Refrigeration
Bromic Refrigeration has a range of cool room refrigeration solutions, including the BGM330 Slide-In Freezer from Zanotti’s new GM range. This versatile unit delivers unparalleled functionality and the simplest installation within the slide-in category. Just check out this featured product!
With its compact and modern build, the BGM330 model requires little vertical clearance for adequate air flow. The unit can be installed through the wall or in straddle position. It comes with prewired connections for cold room lighting and door heaters so installation is basically quick and easy.
Product BGM330 employs a hot gas vaporisation system which eliminates the need for drainage. It has a high 45OC tropical ambient temperature rating for dependability in Australian conditions. Its microchannel condensers enable higher efficiency and reduce energy consumption. Plus, it’s relatively less noisy, thanks to its soundproofed compressor compartment.
All settings and functions, including thermostat differential setting, automatic defrost, evaporator fan starting delay and probe failure alarm, can easily be programmed from a touchscreen control panel.
Learn more about the BGM330 Zanotti GM Slide-In Refrigerated Freezer System. Download the product catalogue or make an inquiry!
|Gross Weight (kg)||105|
|Motor Type||Slide In|
|Temp. Range (°C)||-5 to -25|
|Max. Ambient Temp. (°C / RH)||45|
|Refrigeration Power (W)||2820|
|Recommended Room Capacity (m³)||N/A|
|Run/Full Load (Amps)||11.5/25.1|
|Power Supply (A)||25|
|Pre Wired For Internal Light||Yes|
|Type of Control||Electronic|
|Pre Wired For Heated Door Trim||Yes|
|No Drainage Required||Yes|
|Defrost Type||Hot Gas|