MGM213 Zanotti GM Slide-In Refrigerated Chiller Systems
Product Request Form Refrigeration
Zanotti is an industry-leading brand that supplies some of the best refrigeration systems out there, and Bromic Refrigeration are the sole distributor of Zanotti products in the Australia. Our offerings include the MGM213 Slide-In Refrigerated Chiller System – an impressive combination of Italian engineering and the latest refrigeration and control technology.
The MGM213 can be installed to the cold room in either straddle-wall or through-wall format, thanks to its versatile slide-in system. It requires little vertical clearance as its vertical condenser discharge system lend the unit to ceiling cavity hot air disposal.
A touchscreen digital controller enables simple programming and settings customisation. Functions include automatic or manual defrost, anti short cycle timer, evaporator fans start delay, sensor breakdown alarm, defrost termination, and light switch.
Each MGM213 unit is supplied with cold room bulkhead light and prewired connection for door sensor. The chiller incorporates condensation and vaporisation system to eliminate drainage requirements, although drainage may be necessary in certain applications or in extreme ambient conditions. Its hot gas defrost system reduces energy consumption as well as maintenance.
If you want to know more about the MGM213 Zanotti GM Slide-In Refrigerated Chiller System, simply download the product catalogue or make an inquiry!
|Gross Weight (kg)||80|
|Motor Type||Slide In|
|Temp. Range (°C)||-5 to +10|
|Max. Ambient Temp. (°C / RH)||45|
|Refrigeration Power (W)||2971|
|Recommended Room Capacity (m³)||N/A|
|No Drainage Required||Yes|
|Power Supply (A)||25|
|Type of Control||Touch Screen|
|Pre Wired For Internal Light||No|
|Pre Wired For Heated Door Trim||Yes|
|Defrost Type||Hot Gas|
|Run/Full Load (Amps)||9.3/17.7|