Loxeal 58-11 High Pressure Thread Sealant 100ml

Anaerobic adhesive for the sealing of threaded metal to metal joints Rapid cure time - functional in less than 3 hrs Seals against gas, water, LPG, hydrocarbons, oils and other chemicals High viscosity – won’t run on thread
In stock
SKU
7170583

Ideal for sealing threaded joints against gas, water, oils and other chemicals

  • Anaerobic adhesive for the sealing of threaded metal to metal joints
  • Seals against gas, water, LPG, hydrocarbons, oils and other chemicals
  • High viscosity – won’t run on thread
  • Sealing unaffected by shock/vibration within temperature range: -50°C to + 150°C
  • Rapid cure time - functional in less than 3 hrs
  • Water-safe & AGA-approved
  • Non-Toxic
  • Made in Italy
More Information
SKU 7170583
Weight 10.0000
Application Kitchen, Laundry, Bathroom
For use with LPG (Propane), NG, Water
Barcode N/A
Pack Quantity 1
Retail Packaging Yes
Pressure Rating (kPa) AGA approved to AS 4623:2008 - Class III (2000kPa), Approved by Loxeal s.r.l to 2,600 kPa
Working Temp. Range (°C) -50 to +150
No. of Tubes x Size (ml) 1 x 100ml
Composition Anaerobic Methacrylate
Colour Yellow
Viscosity (25°C - mPa.5) 24,000-70,000 (high thixotropy)
Density (25°C - gr/ml) 1.05
Max. Diameter of thread/gap filling M 80 / 3° / 0.50mm
Flash Point (°C) >100
Solvent Content None
Shelf Life in Years (when stored at 23°C) 2
Handling Cure Time 15-30 minutes
Functional Cure Time 1-3 hours
Full Cure Time 3-6 hours
Shear Strength 6-13 N/mm²
Locking Torque (breakaway & prevailing) 6-10 N/mm² & 2-4 N/mm²
Elongation at Break More than 100%
AGA Approval No. 5048
Sealant/Lubricant Type Sealants
Brand Loxeal
We found other products you might like!