Loxeal Silicone Tap Grease (Water Only)

Loxeal Silicone Tap Grease No.4 80g Tube

Loxeal 58-11 High Pressure Thread Sealant 50ml

The Loxeal 58-11 High Pressure Thread Sealant 50ml is an anaerobic adhesive that is ideal for the sealing of threaded metal to metal joints. This Loxeal thread sealant seals against gas, water, LPG, hydrocarbons, oils and other chemicals.

In stock
  • High viscosity – once oxygen is expelled from sealant it will activate and start to cure
  • Drip proof
  • Sealing unaffected by shock/vibration within temperature range: -55°C to + 150°C
  • Rapid cure time - functional in less than 3 hrs
  • Safe for use with potable water and AGA approved
  • Not suitable for use on plastics
  • Non-Toxic
  • Made in Italy
More Information
SKU 7170581
Application Kitchen, Laundry, Bathroom
For use with LPG (Propane), NG, Water
Barcode N/A
Pack Quantity 1
Retail Packaging Yes
Pressure Rating (kPa) AGA approved to AS 4623:2008 - Class III (2000kPa), Approved by Loxeal s.r.l to 2,600 kPa
Working Temp. Range (°C) -55 to +150
No. of Tubes x Size (ml) 10 x 50ml
Composition Anaerobic Methacrylate
Colour Yellow
Viscosity (25°C - mPa.5) 24,000 - 70,000 (high thixotrophy)
Density (25°C - gr/ml) 1.05
Max. Diameter of thread/gap filling M 80 / 3° / 0.50mm
Flash Point (°C) >100
Solvent Content None
Shelf Life in Years (when stored at 23°C) 2
Handling Cure Time 15 - 30 minutes
Functional Cure Time 1-3 hours
Full Cure Time 3-6 hours
Shear Strength 6-12 N/mm²
Locking Torque (breakaway & prevailing) 6-10 N/mm² & 2-4 N/mm²
Elongation at Break More than 100%
AGA Approval No. 5048
Sealant/Lubricant Type Sealants
Brand Loxeal
We found other products you might like!