Loxeal Threadsealant 58-11 (Gas & Water) 250ml tube

Loxeal 58-11 High Pressure Thread Sealant 250ml

Loxeal Threadsealant 18-10 (Gas only) 250ml tube

Loxeal 18-10 Medium Pressure Thread Sealant 250ml

Loxeal 18-10 Medium Pressure Thread Sealant 100ml

The Loxeal 18-10 Medium Pressure Thread Sealant 100ml is an anaerobic P.T.F.E. modified adhesive that is ideal for the sealing of pipe fittings and coarse thread joints.

In stock
SKU
7170183

Ideal for sealing threaded joints against gas

  • Rapid cure time and easy application
  • Must be metal to metal contact, Not PVC or stainless steel
  • Has to be clean and dry
  • High viscosity – won’t run on thread
  • Sealing unaffected by shock/vibration within temperature range: +10°C to + 150°C
  • Seals when there is no air
  • AGA-approved
  • Non-Toxic
  • Made in Italy
More Information
SKU 7170183
Application Kitchen, Laundry, Bathroom
For use with LPG (Propane), NG
Barcode N/A
Pack Quantity 10
Retail Packaging Yes
Pressure Rating (kPa) AGA approved to AS 4623:2008 - Class II (500kPa), Approved by Loxeal s.r.l to 1,050 kPa
Working Temp. Range (°C) +10 to +150
No. of Tubes x Size (ml) 10 x 100ml tubes
Composition Anaerobic Methacrylate & P.T.F.E.
Colour Yellow
Viscosity (25°C - mPa.5) ≈45000 mPa s @ 25°C Thixotropic
Density (25°C - gr/ml) 1.0
Max. Diameter of thread/gap filling M 80 / 0.30mm
Flash Point (°C) Approximately 100°C
Solvent Content None
Shelf Life in Years (when stored at 23°C) 2
Handling Cure Time 20 - 40 minutes
Functional Cure Time 1-3 hours
Full Cure Time 5-10 hours
Shear Strength 4-6 N/mm²
Locking Torque (breakaway & prevailing) 1.5 - 2.5 N/mm² & 1.0 - 1.5 N/mm²
Elongation at Break More than 100%
AGA Approval No. 5047
Sealant/Lubricant Type Sealants
Brand Loxeal