Bromic Heating has developed a range of accessories, controls and mounting kits, designed specifically for our Smart-Heat range of outdoor heaters.
SMART-HEAT WIRELESS CONTROLLERS
Bromic Heating Wireless Controller
The Bromic Heating Wireless Controller has the ability to switch power supply to two separate circuits, enabling independent ‘On/Off’ control of up to two electric or four gas heaters. The unit’s included radio transmitter offers control from up to 30m or 100ft away and is entirely portable. If required it can also be easily mounted within the case.
Bromic Heating Wireless Dimmer Controller
The Bromic Heating Wireless Dimmer Controller augments the functionality of our base-model Wireless Controller with the ability to dim electric heating output over a percentage gradient. The unit’s included radio transmitter allows quick reductions of heating output to 25%, 50% or 75% while also offering the ability to adjust output up/down in increments of 1%.
Bromic Heating Wireless Master Remote
The Bromic Heating Wireless Master Remote offers complete comfort control and user-programmable customization to those wishing to implement our wireless control solutions on a grand scale. This radio transmitter can adjust an unlimited number of controllers in 6 groups from a single point within its 30m or 100ft range and is a must for larger venues.
SMART-HEAT GAS HEATER ACCESSORIES
Bromic Heat Deflector
Bromic’s Gas Heat Deflectors reduce the clearance required between the top of a heater and the surface above from 1100mm/3’7” to 350mm/1’1” by absorbing heat that would otherwise escape vertically. This stainless steel deflector is unique in its dual layer construction, using the rigid top layer for reinforcement while reducing radiation of heat absorbed by the bottom layer.
Bromic Heater Ceiling Poles
Bromic’s Gas Heater Ceiling Poles offer the ability to mount two units back-to-back below flat or pitched ceilings up to 4m/13’ above the floor. Pre-cut kits are available in 200mm/7.9” increments between 246mm/9.7” and 1046mm/3’5” in length to optimize heater heights in applications with ceilings between 3.2m/10’6” and 4m/13’ above the ground.
SMART-HEAT ELECTRIC HEATER ACCESSORIES
Bromic Heater Recess Kits
Bromic’s Electric Heater Recess Kits enable seamless integration of heating solutions into areas where subtlety and style are paramount. Platinum and Tungsten Smart-Heat™ electric units each have unique recess kits, allowing them to service spaces with ceilings between 2.4m/7’10” and 3.5m/11’6” above the floor by flush-mounting units within roof cavities as small as 250mm/10”!
Bromic Heater Tube Suspension Kits
Bromic’s Electric Heater Tube Suspension Kits are used to space units down to an effective height in higher ceiling applications where wall-mounting may not be appropriate. Using two 1m/3’3” poles that can be cut to length to evenly suspend a heater, these kits retain directional adjustability while providing heat directly to targets from above.
SMART-HEAT PORTABLE GAS HEATER ACCESSORIES
Heater Head Cover
The Bromic Heating Heater Head Cover creates a weatherproof seal around the head of a Tungsten Smart-Heat™ Portable, protecting its elements from the elements. Easily fitted and secured with a drawstring, this genuine cover provides a neat storage solution that extends the life of an already exceptionally durable heater when not in use.
Our product specialists are ready to discuss your heating requirements with you. Please fill out this form and a member of our team will be in touch.
For customer service, technical support and answer to some of our most frequently asked questions please go to our Bromic Support page.