fbpx

SMART-HEAT™ ACCESSORIES

Bromic Heating not only creates a range of award-winning outdoor heaters, but has also developed a range of accessories, controls and mounting kits, specifically designed to ensure our Smart-Heat™ range makes superior heating simple.

Contact us to find out which application is right for you and any additional material that needs to be purchased for easy heating.

SMART-HEAT™ WIRELESS CONTROLLERS

There are three different controllers with increasing functionality, all with a range of 30m. The radio transmitters are entirely portable but can also be easily mounted with double-sided adhesive or with screws.

Bromic Wireless Controller

The unit’s houses an independent ‘On/Off’ control of up to 2 electric or 4 Gas heaters.

Bromic Wireless Dimmer Controller

This controller also manages up to 2 electric heaters or 4 gas heaters but is a step up from the previous model, as it offers quick reductions of heating output to 25%, 50% or 75% or can alter output up or down in 1% increments.

Bromic Wireless Master Remote

For a grand-scale solution, this controller takes control of an unlimited number of heaters in 6 groups from a single point within its range, deeming it invaluable for larger venues.

SMART-HEAT™ GAS HEATER ACCESSORIES

Bromic Heat Deflector

These stainless-steel deflectors absorb heat that would otherwise escape vertically, reducing the space needed between the top of the heater and the surface above to 35cm.

Their unique, dual layer construction uses the rigid top layer for reinforcement while reducing radiation of heat absorbed by the bottom layer.

Bromic Ceiling Poles

This accessory allows two heater units to be mounted back-to-back, beneath flat or pitched ceilings, up to 4m above the floor.

Pre-cut kits are available in 200mm increments, between 246mm and 1046mm in length, to optimize heater unit heights where ceilings are between 3.2m and 4m above the floor.

Heater Head Cover

This accessory allows two heater units to be mounted back-to-back, beneath flat or pitched ceilings, up to 4m above the floor.

Pre-cut kits are available in 200mm increments, between 246mm and 1046mm in length, to optimize heater unit heights where ceilings are between 3.2m and 4m above the floor.

SMART-HEAT™ ELECTRIC HEATER ACCESSORIES

Bromic Recess Kits

This kit enables seamless integration of heating solutions in any area on Bromic Platinum and Tungsten Smart-Heat™ Electric units. The kit permits flush-mounting in roof cavities as small as 250mm servicing spaces with ceilings between 2.4m and 3.5m above floor level.

Bromic Tube Suspension Kits

When wall mounting isn’t available, suspension kits can be used to hang heaters from the ceiling. Comprising two 1m poles that can be cut to length, these kits allow directional adjustability while delivering heat directly from above.

FIND OUT MORE

Our product specialists are ready to discuss your heating requirements with you. Please use this form to schedule a call-back.

Bromic Support

For customer service, technical support and answer to some of our most frequently asked questions please go to our Bromic Support page.

Experience our SMART-HEAT range of outdoor heaters

OUTDOOR HEATING